Quality Laminators
AGL 6400

AGL 6400 Laminates and mounts a 62.0" wide maximum thermal or pressure sensitive film and features pneumatically actuated nip roller and pull roll assemblies. Main supply rolls are equipped with a pneumatic clutch/brake assembly. This feature allows precise and repeatable film tension control as well as bi-directional unwind/rewind capabilities. 0-20 fpm operating speeds, mechanical and photoelectric emergency stops, 12.5" diameter capacity heavy-duty cantilevered unwind stations and 8.0" diameter pneumatically actuated nip roller assembly.  

application/pdf iconMatrix-Brochure.pdf
AGL 64i

The AGL 64i laminates and mounts a 62.0" wide maximum thermal or pressure sensitive laminating film. All models feature 10.0" diameter heavy-duty cantilevered unwind stations, 6.0" diameter pneumatically actuated nip roller assembly with “dial-in” spacer system, RTS break system for precise tension control feed back and 0-20 fpm operating speeds.

Innovative Features
1 Tapered Core Chucks – Allows for fast and easy loading of materials onto the supply shafts.
2 Easy Web Feed Table – The “Easy Web Feed Table” virtually webs the laminator by itself by pivoting backward 90° giving the operator full access to the lower supply shaft. The lower wrap idler is uniquely linked to the “Easy Web Feed Table” which properly loads the lower laminating film against the nip roller when the table is returned to its home position. This feature eliminates the laborious task of crawling under the in-feed table to load the bottom supply shafts. The “Easy Web” system also features a dual latching system for secure docking, an elegant release system for smooth single handed operation and a hidden film guide. The film guide is exposed when the table is pivoted into its loading position and provides fast, accurate film alignment, reducing set-up time and material waste. The new “Easy Web Feed Table” system is a standard feature on AGL’s new 64i laminator.
3 Repeatable Tensioning System (RTS) – Typical film tensioning systems used on most laminators have no way of allowing the operator to record or duplicate proper tension settings. Without a feedback system, it is tough to pinpoint a problem or a solution to the problem or a solution to print curl. The “RTS (Repeatable Tensioning System)” brake and display allows the operator to measure the amount of braking resistance they are applying to the film un-wind shafts. When the operators identify the ideal tension setting for any film combination, they can simply record the tension setting and duplicate for future jobs. The “RTS” un-wind brake insures consistent repeatable results, eliminating the guess work and rework in finding proper film tensioning. The “RTS” brake is a standard feature.
4 Quick Latch – Reducing setup time and waste is an important issue with shop owners. So, in order to speed loading and unloading of lamination films on and off supply shafts, AGL has introduced “Quick Latch.” This simple but cool looking latch secures the swing out supply shafts and maintains their tram without tools, pins or thought. Releasing the “Quick Latch” is simple and fast, just grab the supply shaft and lift the “Quick Latch” with a small brush of your thumb. “Quick Latch” is a standard feature on the new 64i.
5 Curl Cam – During the lamination process of bonding materials together, unwanted curl can develop, resulting in prints that don’t lie flat. Most laminator operators use small amounts of break tension to combat print curl. However, this method still limits the operator from running certain types of film combinations and results in post de-lamination. It’s far better to form the film during the bonding cycle to avoid print curl. This forming also allows for processing unique film combinations. For example, using a 10 mil and a 1.7 mil combination. By engaging the “Curl Cam” the laminator operator can form the film as it travels through the laminator. The “Curl Cam’s” unique 360° rotation means you never have to unweb film to make adjustments. The “Curl Cam” is currently sold as an optional feature.
6 Logic Control Panels – Designed with user-friendly controls and gauges for quick adjustments. Convenient access to essential controls from both the front and the rear of the laminator.
7 New Colors – The new 64i is now available in three designer colors.
8 Core-less Print Holder – The “Core-less Print Holder” is used for sheet feeding long prints. No longer will operators have to spend time rolling long prints onto a core to keep images from making contact with the floor, therefore becoming dirty. The “Core-less Print Holder” is easy to attach and remove when not in use. The “Core-less Print Holder” is a standard feature on the new 64i from AGL.
9 H.I. Wind-Up Cores – High impact, light-weight PVC wind-up cores are featured on the 64i for versatility and easy removal. Eliminates the need for endlessly searching for a spare corrugated core
   
  Physical Dimensions/Power Requirements  
  Overall Width: 89"  
  Maximum Depth: 57"  
  Maximum Height: 58"  
Weight: 2650 lbs. (approx.)  
Control Voltage: 220vac/50-60hz/1 Phase/60 Amp  
       
Copyright © 2005 Advanced Greig Laminator, Inc. All rights reserved. Revised: November 03, 2008

application/pdf iconAGL-64i-Brochure.pdf
AGL Encore Series

AGL Encore is capable of mounting and laminating up to 62” wide laminates. This unit features a pneumatically actuated nip assembly as well as a pneumatically actuated pull roll assembly making ease of use unparalleled in the industry. There is a dial-in shim assembly for mounting and laminating several different thickness’ of products as well as a mechanical unwind tension system to assure repeatable results. Capable of running up to 15 ft per minute. The Encore series is available in 4 different models:

• Encore Maxim Dual heated rollers, Bi-Directional, full of operator friendly options
• Encore DHR Dual heated rollers, Bi-Directional unit
• Encore SH Single heated roller (top). Pressure sensitive, 1 sided heat activated films, and mounting.
• Encore NH No Heat, cold unit. Pressure sensitive and mounting. 
Additional features and specs.
NH SH DHR Maxim
Manual Tension ■ ■ ■ ■
Pneumatic Tension        
320° Heated Top Roller   ■ ■ ■
320° Heated Bottom Roller     ■ ■
Output Slitting        
Unwind Slitting (upper)        
Rotary Outfeed Trimmers        
Thermal Encapsulation     ■ ■
P.S. Overlaminating ■ ■ ■ ■
Maximum Mounting Thickness 1.19 1.19 1.19 1.19
Reversible     ■ ■
RTS Brakes opt. opt. opt. ■
Easy Web Infeed   opt. opt. ■
Curl Cam        
Web Cooling     ■ ■
Rubber Pull Rolls       ■
   
Physical Dimensions/Power Requirements
Overall Width: 89"
Maximum Depth: 57"
Maximum Height: 58"
Weight: 2650 lbs. (approx.)
Control Voltage: 220vac/50-60hz/1 Phase/60 Amp
Copyright © 2005 Advanced Greig Laminator, Inc. All rights reserved. Revised: December 07, 2008

application/pdf iconEncore-Brochure.pdf

products by application