Quality Media & Laminating Systems, Inc.

Standard Features

AGL’s Heated Roller Construction

AGL uses a proprietary heated roll design for faster heat transfer and uniform temperature across the entire width of your rollers. This insures even activation of your thermal adhesive films without cold or hot spots. In addition, AGL uses a silicone coated steel roller construction guaranteed to have a 100% flat profile. Plus, AGL rollers have an embedded thermal temperature sensor to protect the rollers from overheating and extends roller life.

Quick Latch

A simple and fast way to secure the rolls of material loaded onto the supply shaft. The quick latch cradle insures film is tracking straight through the laminator without walking to one side causing film distortion and possible silvering.

Tapered Core Chuck

AGL’s tapered chuck makes film loading fast and easy.AGL’s special auto grip will not tear into the material’s core, making removal as fast and easy as loading

Optional Equipment

Easy Web In-Feed Table

Table pivots 90° and is linked to the bottom idler, making it retract or (travel) when the table is rotated. This unique feature allows the operator to web film from the bottom supply shaft. Also includes a dual latch for secure docking and a single handle release for smooth and fast one handed operation.

RTS Brake

(Repeatable Tension System Brake) - Adjusting film tension throughout the production process and from job to job. Just set it, record it, and repeat it. Get consistent results each time you laminate a print.

Print Holder

The print holder is used for handling large prints before they are laminated. It keeps them from unrolling, touching the floor, or getting dirty. Makes the operator’s job much easier.

Digital Speed Readout

Fold Down Out-Feed Table

Lower Back Product Rewind

Standard Models/Physical Dimensions/Power Requirements

	Max. Film Width: 62”"
	Core Diameter: 3"
	Max. Roll OD: 8”"
	Speed: 15 fpm
	Power: 60-40-20 Amp, 230 VAC, Single Phase
	Air Requirements: 90 PSI Max.
	Dimensions: 88-1/2”W x 50”H x 42-1/2”D

The bottom line is that these advanced features
all work together to give you peace of mind and
a consistent, quality product time after time.

Encore Maxim Ultimate Performance
The Maxim includes the same advanced features as on the Encore DHR with many extras to assure faster production, unlimited settings and increased versatility.

	Repeatable Tension System Brake (RTS) - offers consistent film tension throughout the production process.
	Easy Web In-Feed Table - easy access to bottom film supply shaft.
	Pivoting/Removable Rear Table - easy access to finished product (also roll to roll applications)
	Digital Speed Readout - accurate, repeatable speeds.
	Print Holder - keeps prints from touching the floor and getting dirty prior to being fed into the laminator.

Encore DHR Exceptional Performance
Take all of the advantages of the Encore SH, and add these features to make the DHR:

	Bi-directional Capability - run thermal film from one side and mount from the other
	Pull Roll Assembly - pneumatically controlled, silicone coated for exacting web tension and easy clean-up
	Dial-In Spacer System - maintains consistent opening at nip for various substrate thicknesses.
	Easy Access Controls - from both the front and back of the laminator.
	Chiller Bar - adjustable to manage print curl.

Encore SH Advanced Achievement
Utilizing a single top heated roller design, the model SH offers you the ability to run one-sided thermal films and pressure-sensitive overlaminates.

	Unique Nip Roller Design - pneumatically controlled, assures and maintains a uniform pressure across the entire roll face for quality production and safe efficient operation.
	Quick Latch Assembly - fast secure docking of film supply shafts.
	Temperature, Pressure, Speed Controls - easy access for the operator, and a foot operated jog switch for hands free drive operation.
	Advanced Heated Roll Technology - provides a superior, reliable temperature profile across the entire roll face so you can achieve consistent quality product performance.

Encore NH Essential Productivity
The Encore NH model is a cold laminator requiring no heat. It is the perfect choice for high speed mounting and overlaminating direct-to-print vinyl applications.

	Built sturdy, easy to use.
	Proprietary Nip Roll Design - pneumatically controlled, assures and maintains a uniform pressure across the entire roll face for the production of consistent, quality products and safe efficient operation.
	Fast, operator friendly, extremely productive.